Thursday, December 7, 2023
Home BNN National Floors Direct Discusses Ways to Prepare Your Home Before a New Floor Installation

National Floors Direct Discusses Ways to Prepare Your Home Before a New Floor Installation

by Busines Newswire
0 comment

Renovating your home and installing new flooring is a thrilling experience. It can change the living space’s look and feel. Since it’s an investment, you’ll want to ensure every step is taken to prepare your home. Here are several essential ways National Floors Direct shares.

Remove furniture and belongings from the areas. This gives technicians a clear space and protects items from damage.

Clean the floors. Dust, dirt, and debris can affect the quality of installation. Vacuum or sweep for a smooth surface and to avoid imperfections.

Measure door clearances. The height and width of each door must be measured. This prevents complications or delays caused by doors not functioning correctly with the new floor.

Address any issues with the subfloor. Uneven surfaces or damages should be fixed for stability and longevity. Consult professionals to assess the condition and recommend repairs.

Consider the drying time of adhesives. Some need up to 72 hours before furniture can be moved back—factor this timing when coordinating tasks or events.

Clear the Room

This 4-step guide to clearing the room will prepare the home for new flooring.

First, remove large furniture pieces like sofas and tables. Then, take down any artwork hanging on the walls. Remember smaller items too, like lamps and plants. Finally, clean the room thoroughly. Consider any electrical outlets or switches that may need to be addressed.

Measure and Assess the Floor

Assessing and measuring the floor is essential before installing a new one. Here’s how to do it:

  1. Use a tape to measure the length and width of the room.
  2. Record these measurements carefully, noting any irregularities or obstacles.
  3. Examine the existing floor for any signs of damage or wear.
  4. Consider the type of flooring you plan to install and its requirements.

Remember to check for any moisture issues or unevenness in the subfloor. These are key for a successful installation that’ll last.

Prepare the Subfloor

Are you preparing the subfloor? It guarantees that the base is solid and ready for the new flooring to be put in. Follow these steps to ensure a successful installation process.

  • Clean it. Get rid of dirt, dust, or debris for a clean surface.
  • Fix any damage. Look for cracks, holes, or anything else that needs repairing. Fill in with a suitable filler and let it dry.
  • Level it. Use a straight edge or level tool to check if the subfloor is level. If not, use a self-leveling compound to even it out.
  • Install an underlayment. This provides cushioning and moisture protection – helping your new floor last longer.
  • Moisture test. Excessive moisture can cause issues like warping and mold. Use a moisture testing kit to check.

These steps are essential when preparing the subfloor. Doing it right will save you time and money. Transform your home with a stunning new floor.

Gather the Necessary Tools and Materials

Step 5 is all about getting the stuff for your flooring project. Here’s a guide to help:

  • Create a checklist – list all the tools and materials you need.
  • Measure and calculate – measure the area and use the measurements to determine how much flooring you need.
  • Research suppliers – read reviews, compare prices, and get the best option.
  • Buy essentials first – hammer, adhesive, underlayments, measuring tape, and other items specific to the flooring type. Consider renting more significant tools if needed.
  • Prioritize safety – gloves, safety goggles, dust masks, knee pads, and ear protection.

Acclimate the New Flooring

To acclimate new flooring, it’s crucial to follow six steps:

  1. Unbox the materials without damaging them.
  2. Place in a well-ventilated area.
  3. Maintain consistent room temperature.
  4. Monitor humidity levels (ideally 30-50%).
  5. Allow sufficient time for acclimation.
  6. Make sure the subfloor is dry before installation.

Install the New Flooring

Installing new flooring is the fun last step to give the home a new and improved look. National Floors Direct provides a 5-step guide to help you:

  1. Prepare the area – Clear the room of all furniture, decorations, and other things.
  2. Remove old flooring – Remove the existing material and make sure any glue or adhesive is gone.
  3. Lay down underlayment – Put a suitable underlayment material over the subfloor for extra insulation, moisture protection, and noise reduction.
  4. Begin installation – Start laying out the new flooring from one corner of the room. Follow manufacturer instructions to fit everything together.
  5. Finishing touches – Cut any excess material at edges and corners for a neat and professional finish.

You can add unique details to make flooring installation even better—patterns, borders, or eco-friendly materials.

As you work on your flooring project, remember it’s more than a technical process. It’s about making a space that reflects your style and makes everyone happy.


Busines News Wire

About US

Edtior's Picks

Latest Articles

All Right Reserved. Designed and Developed by Business News Wire.