BusinesNews Wire Press Release company Logo
Home Ipsnews Tips for Pulling a Part from a Junkyard

Tips for Pulling a Part from a Junkyard

by Busines Newswire
0 comment

Visiting a pull a part junkyard can be an affordable way to find used auto parts for your repair or restoration project. However, navigating a junkyard and properly removing parts requires some knowledge. Follow these tips to successfully pull the parts you need from a pull a part facility.

  • Verify Part Availability

Before visiting the pull a part, call ahead or check their inventory online to see if they have the specific part you need in stock. Each junkyard will have varying availability based on the vehicles currently in their yard. Checking ahead saves wasted trips if they don’t have your required part.

  • Come Prepared with Tools

Bring essential tools like wrenches, sockets, pry bars, hammers and safety gear to properly remove parts. Also pack ramps, jacks or a creeper to easily access parts underneath the vehicles. Having the right tools makes part removal much easier. Don’t forget cleaning supplies to wipe down parts before hauling them home.

  • Review Removal Procedures

Study the proper techniques for removing the parts you need. Consult repair manuals or online videos to understand all the bolts, clips and fasteners that must be accessed. Some parts may require supporting components to be disassembled first. Reviewing the procedures ahead of time prevents damaging parts.

  • Search Efficiently for Your Vehicle

At the pull a part, systematically go row by row to locate the make and model you need. Look for complete vehicles that match the year of your required part to improve the odds it’s there. The inventory is always changing, so be thorough in your search. Don’t skip rows or sections.

  • Inspect Parts Thoroughly Before Removing

Once you find the vehicle, inspect the part carefully before spending time removing it. Check for damage or excessive wear. Verify the part is the right year and spec for your vehicle. Make sure it will be worth installing before pulling.

  • Follow Proper Removal Steps

Adhere to the removal procedures you researched when pulling the part off the vehicle. Work methodically and don’t force or rush the process. Damaging the part during removal means it won’t work on your vehicle. Watch for rusted or stripped bolts that may break.

  • Label and Organize Parts

As you disassemble components, bag and label related parts, fasteners and hardware together. This organization helps during reassembly and ensures no small parts are lost. Keeping hardware together maintains the integrity of the part.

  • Handle Parts with Care

Take care when handling pulled parts to avoid damaging them. Use caution when loading and transporting parts. Dinging, denting or cracking a part could render it unusable. Protect parts during transport with padding and straps.

  • Clean Parts Thoroughly

Once home, thoroughly degrease and clean pulled parts to remove dirt, grime and corrosion. This cleaning allows you to inspect parts more closely for wear and damage. Proper cleaning also prevents premature failure when reinstalling.

  • Verify Part Functionality

Before bolting on used parts, test and verify their functionality. Electrical parts should be bench tested. Mechanical parts like calipers should be rebuilt and pressure tested. Ensure pulled parts operate properly before relying on them in your vehicle.


With some preparation and diligence, you can save money sourcing quality parts from a pull a part junkyard. Following these tips will help you successfully remove the parts you need while avoiding damage. For an extensive selection of high-quality used auto parts, visit RoadTestedParts website.