Get the Most Accurate Measurement with a Quality Corolis Flow Meter

Coriolis is a kind of mass flow meter that gives the most accurate measurement for corrosive, clean gases and liquids. It is now widely used in industries where you need to measure accurately clean and corrosive gases passing through pipes and liquids. Although slightly more expensive than other flow meters it is more reliable as it uses the inertial caused by liquid or gas flowing through oscillating pipelines. It is this inertia that causes the pipe or tube to twist in direct proportion to the mass flow. It is this kind of twisting that is measured with sensors, but the same cannot be more accurate than a high-quality corolis flow meter manufactured by Silver Instruments, China. There may be few other authentic manufacturers yet you can never fuse both high-quality and low-priced products. If you place an order for bulk requirements then the discount is pretty good.

The flow meter is also used in several scientific applications, but the same must be maintained properly to give very good results for a long time. In industrial uses, a gas or liquid flows through the tube and the same is vibrated by an actuator. This creates artificial acceleration into the flowing liquid or gas thereby producing a twisting force that is measurable.

Maintenance of Coriolis Flow Meter

It is mandatory that you keep your Coriolis flow meter in good condition and hence you need to clean and maintain it periodically. If not, then your meter may show slight error and this may prove to be costly for the industry. You should therefore make sure that the Coriolis mass flow meter is cleaned with a non-corrosive cleaning solution. The solution is applied so that the materials that lie coagulated inside the meter are broken loose.

It is then pressure washed after the materials are removed. You will also need to make a thorough inspection of the tube with the help of a digital microscope so that there are no further materials stuck that your naked eyes cannot detect.

If you order the same from the company’s website it comes with a transmitter also so that you needn’t have to buy them separately. There are different types of Coriolis flow meter and the same is used according to the industrial processes.

Types of Coriolis Mass Flow Meters

While browsing the internet you will find that the Bent tube Coriolis is mainly used for tough fluid measurements. Here, the fluid has a high viscosity or high-pressure flow rate. In the case of juice-making factories or distilleries, steam flow measurement is done with usual flow meters, but some have PID controllers and batch functions as well.

The high-temperature natural gas flow meter is for high accuracy and reliability in measuring the gas flow rates including crude oil, loading fuel, bulk hydrocarbon, etc. They also are larger in size. The high-temperature Coriolis flow meter can measure fluids’ maximum temperature up to 350 degrees C.

If you wish to know more you may contact their customer care service from where you may get good suggestions and the most suitable mass flow meter for your job.